Part NO. :	DWDMFBG –series
Datasheet :
Availability :

Description
 IDP's High Power Diode Laser Modules are manufactured by adopting specialized fiber-coupling techniques, resulting in volume products with a high efficiency, stability and superior beam quality. The products are achieved by transforming the asymmetric radiation from the laser diode chip into an output fiber with small core diameter by using special micro optics. Inspecting and burn-in procedures in every aspect come to a result to guarantee each product with the reliability, stability and long lifetime.
Our research staffs are constantly improving and innovating the processing technology in the producing process, based on the professional knowledge and experience accumulated in long-terms. We are also continuously developing new products to meet customers’ specific needs.
At Idealphotonics, to provide high quality products with reasonable price is our always goal.
Features
Output power：50mW
Wavelength：660土5nm
Fiber core diameter:6pm (9pm optional)
0.14NA
Fiber laser feedback protection
Applications
Pilot light
660nm Characteristics (25°C)

Typical device performance(25℃)

Other Parameters 

Operating notes
Avoid eye exposure to direct or scattered radiation.
ESD precautions must be taken.
Please connect pins to wires by solder instead of using socket when operation current is higher than 6A.
Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260℃
and time shorter than 10 second.
Use constant current power supply. Avoid surge current.
Laser diode must be used according to the specifications.
Laser diode must work with good cooling.
A minimum bend radius should be 300 times greater than the fiber cladding diameter.
Operation temperature is 10℃~ 30℃.
Storage: -20℃~ +70℃, all pins short-circuit.
Related Items

---

10um series of optical fiber	10um series of optical fiber	10um series of optical fiber