ALL CATEGORIES
COMPANY INFO
LINKED
编辑
Delivery Fee : ＄0.00
Quantity :
| Part NO. : | IDP-Yb-10xx-B-PW-SF: PM |
| Datasheet : |
|
| Availability : | In store |
1064nm(1.0um) High Power Single-Frequency Polarization Maintaining Ytterbium Fiber Amplifier
The high power single frequency polarization maintaining fiber amplifiers of Idealphotonics Laser are designed specifically for the ultra-narrow linewidth single frequency laser source, such as the fiber lasers based on the principle of DFB or DBR. This kind of amplifiers has the capability of boosting the low power optical signal at kHz magnitude up to 50W output power and preserves the spectral property of the input signal. The amplifiers use high power high performance multi-mode pump internally, employ the technology of double cladding fiber amplification, and have the integrated design of all polarization-maintaining structure. The output power can be continuously tuning. MARS series fiber amplifiers are integral Turn-Key system with the microprocessor inside for controlling. The front panel is equipped with the switch to start the laser, the LCD to display the state of the power and the knob to adjust the output power.
Thanks to the extensive experience of handling the double cladding fiber, Idealphotonics Laser conducts proper optimal design to the high power polarization maintaining fiber amplifiers, thus achieving high efficiency output while suppressing the nonlinear effects of the fiber. The unique thermal treatment technology guarantees that the desktop fiber amplifier can operate stably for a long time. The high-speed response protection circuit monitor the power of input and output signal automatically so that it can cut down the operation of the high power pump in case of the falling off of the input signal, thus ensures the safety of the whole system.
● High power and low noise EDFA
● Mode- locked fiber laser
● Yb-doped fiber amplifier
● Test and measurement
● Other lab applications
Features
● Coherent detection
● Coherent combining
● Atomic trapping
● Fiber sensing
● Requency doubler
Parameter
Unit
Specification
Min
Typ.
Max
Part NO.
IDP-Yb-10xx-SF
Operating wavelength1
nm
1035
1064
1083
Input power2
mW
1〜10
10〜50
50〜200
Output power3
W
0.5
-
50
Input Isolation
dB
30
-
-
Output Isolation
dB
30
-
-
Output powertunable range
%
2
-
100
Polarization
Extinction Ratio(PER)
dB
15
20
-
Output power stability4(8h)
%
-
±1
±2
Beam quality
M2
<1.2
Input fiber type
PM980
Output fiber type
PM980
or other
Length of the output fiber
m
>1
Optical connectors
FC/APC((other
options available)
Powersupply
VAC
170
220
260
Powerconsumption
W
-
-
150
Operation temperature
°C
0
-
30
Storage temperature
V
-40
-
+85
Dimension
mm
420(L)x485(W)x105(H)
Cooling mode
Air-Cooled
1. Typical operating wavelength: 1053nm、1064nm、1083nm;
2. The input power is related to the output power;
3. Typical Output power: 0.5W、1W、10W、50W;
4. The output power stability is measured under 25°C, 30minites after warm-up.
Spectrum ：
Ordering Information：
IDP-Yb-10xx-B-PW-SF: PM
10xx:Operating wavelength in nm, example: 1053nm、1064nm、
1083nm
B:B-Benchtop
PW:Output power in W, example:0.5-0.5W、1-1W、10-10W SF:Single Frequen
Related Items:
|
1310nm Superluminescent Diode |
High Sensitivity PIN-FET Receiver Module |
ICS-4000 PM Fiber Fused Biconic Tapering System |
 |
 |
|