Specifications
Parameter | Min. | Typical | Max. | Unit | Notes |
wavelength | 1530 | 1550 | 1570 | Nm | Customizable |
Operating temperature | -10 | 70 | ℃ | ||
Output power | 16 | 17 | dBm | Customizable | |
RIN noise | -165 | -163 | dBc/Hz @100kHz | ||
Operating current | 400 | 2000 | mA | ||
Operating voltage | 4.75 | 5 | 5.25 | V | |
Lorentz linewidth 1 | 10 | 20 | KHz | Customizable | |
Side Mode Suppression Ratio | 50 | dB | |||
FM range | 3 | 5 | GHz | ||
Modulation rate | 1 | 100 | 200 | KHz | |
FM linearity | 1% | ||||
Output method | Optical fiber output(default) | ||||
Connector type | FC/APC(default) | ||||
Fiber type | SM/PM |
Note: The line width test solution is a delayed self-heterodyne beat frequency test
Connector Definition
PIN# | Name | Function / specifictaion |
1 | Vcc | Input power 5V/3A, low noise |
2 | Tx(output) | Data output, RS232/3.3 to5V TTL232 (default) |
3 | Rx(input) | Data input, RS232/3.3 to5V TTL232 (default) |
4 | Gnd | Ground |
5 | Gnd | Ground |
6 | Vcc | Input power 5V/3A, low noise |
7 | Mod+(input) | N/A |
8 | Mod-(input) | N/A |
9 | Enable(input) | Laser output enable, low level on (default on) |
Ordering information
PHX- C-T-M-C32 - ①②-③-④--------- 000 Power:Unit dBm
Coding linewidth Coding connector type
2 100 KHz 0 SMF/FZ-APC
4 20KHz 1 PM/FC-APC
6 5KHz
8 1KH